Fireplace Installation in Clearwater, FL
The right fireplace for the room, installed to the maker's instructions and the code.
- Licensed & insured
- Same-day service available
- Owned and run locally
- Family run
Get Your Free Inspection
Request logged, thanks
Our office will be in touch shortly to book the free inspection.
Rather call? (239) 748-2971
Save 10% by Booking Within 72 Hours of Inspection
We inspect for free. Any service you book within 72 hours of that visit is 10% off the written price.
Why Clearwater Homeowners Call Us
Installing a fireplace in Clearwater starts with choosing the right type for the room: wood-burning, gas or electric, built-in or an insert. Our crew plans the venting, clearances and hearth, installs the unit to the maker's instructions and the Florida Building Code, and pulls the permit when one is required.
-
Family run
One family owns the company and answers for every job our crew does.
-
Owned and run locally
Our office is on Calumet St, and our work stays in Clearwater.
-
Free inspection
We inspect for free and tell you plainly what we found.
-
No hidden fees
The written price is the price. New work needs your yes first.
-
Same-day service available
When the day's schedule has an open slot, we can come out the same day.
-
Licensed & insured
Licensed and insured for chimney and fireplace work. Ask for the details when you book.
Signs You May Need Fireplace Installation
Adding a fireplace or replacing an old one starts with the house: where a vent or chimney can run, what the floor can carry, how the room will be used. Our crew installs factory-built and masonry fireplaces, inserts, and gas and electric units, and handles the chimney pipe installation that comes with them.
- An old prefab fireplace with rusted or cracked panels
- A room that needs a fireplace where there is none
- A wood fireplace you want to change to gas or electric
- A renovation that moves or replaces the fireplace
- A fireplace that can no longer be repaired safely
Choosing the fireplace
The first decision is fuel. A wood burning fireplace gives a real fire and needs a full chimney. A gas fireplace needs a gas line and a vent, but can sit on an outside wall. An electric fireplace needs only power and wall space. In a Clearwater home that rarely needs heat, many owners choose gas or electric for the look; others want wood for cool nights. We go through the trade-offs during the free visit.
Prefab and zero clearance fireplace installation
Factory-built fireplaces, often called prefab or zero clearance units, are tested as a system with their own chimney pipe, firestops and cap. They can be framed into an interior wall or a chase with tight clearances. Prefab fireplace replacement is common when the original unit's panels or firebox have failed; the new unit must be listed to work with the chimney pipe it uses, or the pipe is replaced too. As a fireplace installation company, we handle prefab fireplace installation as a complete system; as your fireplace installer we do not mix chimney parts from different makers.
Masonry fireplace installation
A masonry fireplace is built in place from firebrick, block and brick, with a masonry chimney above it. It needs a footing and careful planning, and in most Florida homes it is part of new construction or a major remodel. We build to the masonry chapter of the Florida Building Code, Residential, and to NFPA 211.
Inserts and conversions
If you already have a fireplace, an insert is often simpler than a new install. See wood-burning insert installation, gas fireplace insert installation or electric fireplace installation for those jobs.
Permits and the finished install
New fireplace installation usually needs a permit, and the City of Clearwater building department sets what it covers. We handle the paperwork, schedule the inspection, and leave you the manual and the listing information. At the end we light or switch on the unit with you and show you how to run and care for it.
From Your Request to a Finished Job
-
Tell us what you see
Water on the hearth, smoke in the room, a stuck damper or a cap gone after a storm. A few words on the request form is enough.
-
Free inspection
A crew member goes over the fireplace and chimney in person, firebox first, then up to the top of the stack.
-
Written price
You get the finding and the price on paper. Nothing is added later without your say.
-
Work and walk-through
The approved work gets done, the site is cleaned, and we point out what changed and how to care for it.
Fireplace Installation Questions
Can a fireplace be installed on the second floor?
Yes. Factory-built wood and gas fireplaces are often installed upstairs because they are light and vent through the wall or roof. A masonry fireplace upstairs needs structural support. The listing, the floor framing and the vent route decide what fits.
Do you need a fireplace surround?
Every fireplace needs non-combustible material around the opening for a set distance, as the maker's instructions and the code specify. The decorative surround can be tile, stone or a factory panel, as long as it meets those clearances around the firebox. A mantel above must keep its own clearance too.
How are fireplaces built?
A masonry fireplace is built on a footing with a firebox of firebrick, a damper, a smoke chamber and a lined flue. A factory-built fireplace is a listed metal box with its own chimney pipe, framed into a wall or chase. Both need a hearth and clearances.
Does a fireplace add value to a home?
Many buyers look for a fireplace, even in Florida. A working one with a sound firebox and damper usually helps a listing, while one with a cracked firebox, a leak or a dead pilot can count against the house. A clean inspection report helps either way.
Can a fireplace heat a whole house?
An open wood fireplace mostly heats the room it is in, because much of the heat goes up the flue. A wood or gas insert with a blower can spread warmth further. In a Clearwater home a fireplace is usually for comfort on cool nights, not the main heat source.
How long does a fireplace installation take?
An electric fireplace can go in within a day. A gas or prefab wood fireplace with new venting usually takes a few days, plus the permit inspection; a masonry fireplace is built over weeks as part of a larger project.
Request Your Free Inspection
- Free inspection
- Family owned and operated
- Licensed & insured
Request logged, thanks
Our office will be in touch shortly to book the free inspection.
Chimney Problem That Cannot Wait?
Our 24/7 emergency line is open for chimney and fireplace trouble in Clearwater.
If there is fire, a gas smell or a carbon monoxide alarm, get everyone out and call 911 from outside first.
Proudly American
A locally owned Clearwater family business, with an experienced crew that works inside the city.
Book a Free Chimney Inspection in Clearwater
Send the short form and the office sets a time. Our crew inspects, and you see the written price before anything is touched.