
Chimney Rebuild in Clearwater, FL
Only the courses that have failed come down, and they go back up plumb and sealed.
- Licensed & insured
- Same-day service available
- Owned and run locally
- Family run
Get Your Free Inspection
Request logged, thanks
Our office will be in touch shortly to book the free inspection.
Rather call? (239) 748-2971

Save 10% by Booking Within 72 Hours of Inspection
We inspect for free. Any service you book within 72 hours of that visit is 10% off the written price.
Why Clearwater Homeowners Call Us
Rebuilding a chimney means taking down failed masonry and laying it back up with new brick, mortar, crown and flashing. Most Clearwater jobs are a partial rebuild of the stack above the roofline. A full rebuild to the ground is needed only when the whole chimney is unsound or leaning badly.
-
Family run
One family owns the company and answers for every job our crew does.
-
Owned and run locally
Our office is on Calumet St, and our work stays in Clearwater.
-
Free inspection
We inspect for free and tell you plainly what we found.
-
No hidden fees
The written price is the price. New work needs your yes first.
-
Same-day service available
When the day's schedule has an open slot, we can come out the same day.
-
Licensed & insured
Licensed and insured for chimney and fireplace work. Ask for the details when you book.
Signs You May Need Chimney Rebuild
Rebuilding is the job no one wants to hear about, so we only recommend it when repair will not hold. When brick above the roof is loose through its full depth, the stack leans, or water has destroyed the masonry from the inside, a partial or full chimney rebuild is the safe way back.
- Bricks above the roof loose enough to move by hand
- A stack that leans away from the house
- Large cracks through brick on several faces
- Mortar washed out deep into the joints
- Repeated leaks after earlier repairs
Partial chimney rebuild
Most chimney rebuilding jobs stop at the roofline. The section above the roof takes the most weather, so it often fails while the brick below, sheltered inside the house, stays sound. We take down the loose courses to solid masonry, lay them back with matching brick and mortar, form a new crown, and install new flashing as the stack comes back through the roof.
Full chimney rebuild and reconstruction
A full chimney rebuild takes the stack down to its foundation or to a sound base. That happens when the masonry is failing throughout, the footing has settled, or the chimney has separated from the house. Chimney reconstruction is a larger job with more planning, a permit and protection for the roof and landscaping, and it is the moment to decide whether the fireplace stays wood-burning or changes.
Leaning chimney repair
A chimney that leans has either a failing footing or deteriorated masonry that can no longer carry its own weight. A lean that is getting worse is a safety issue, because the stack can fall onto the roof or the yard. We check how far it leans, whether it is moving, and where the failure starts, then explain the options. Many leaning stacks are taken down and rebuilt above the roofline; some need structural work below.
Rebuild chimney above roofline, done in stages
We protect the roof around the chimney, take down courses by hand, and keep debris out of the flue and firebox. The flue liner is checked or replaced while the stack is open. New brick goes up with matching mortar, then the crown, cap and flashing finish the job. A chimney rebuild contractor should explain each stage, and our written estimate lists them.
From Your Request to a Finished Job
-
Tell us what you see
Water on the hearth, smoke in the room, a stuck damper or a cap gone after a storm. A few words on the request form is enough.
-
Free inspection
A crew member goes over the fireplace and chimney in person, firebox first, then up to the top of the stack.
-
Written price
You get the finding and the price on paper. Nothing is added later without your say.
-
Work and walk-through
The approved work gets done, the site is cleaned, and we point out what changed and how to care for it.
Chimney Rebuild Questions
When should a chimney be rebuilt instead of repaired?
Rebuild when bricks are loose through their full depth or the stack leans. Rebuilding is also the answer when repairs no longer hold because the masonry is soaked and breaking down. Cracked crowns, worn joints and a few spalled bricks are repairs, and the inspection shows which side of that line yours is on.
How long does it take to rebuild a chimney?
A partial rebuild above the roofline often takes two to four days, including the new crown and flashing. A full rebuild takes longer and depends on the height, the permit and the weather; new mortar and a new crown need curing time before the fireplace is used.
Can chimneys be removed instead of rebuilt?
Yes, but removal is a different job. Taking a chimney down for good means closing the roof deck and wall openings, then dealing with the firebox and hearth below. Sometimes rebuilding only the top section above the roof is simpler, and the written estimate explains both paths.
How is a chimney stack rebuilt?
First the loose courses are taken down by hand to sound brick. Then new brick is laid with mortar matched to the old, the flue liner is checked, and a new crown is formed; flashing and a cap go on last, before the roof around the stack is closed up.
Is a leaning chimney dangerous?
A leaning chimney can be dangerous if the lean is growing, because the masonry or the footing has failed. Keep people and cars away from where it could fall, stop using the fireplace, and book an inspection soon. Some leans are old and stable, which the inspection checks.
Will a rebuilt chimney match my house?
New brick is chosen to match the old in size, color and texture. Where suitable brick exists, we use it, and tint the mortar to the existing joints. New brick looks brighter at first, and the difference fades as it weathers; stucco chimneys are refinished to match the house.
Related Chimney and Fireplace Work

Chimney Problem That Cannot Wait?
Our 24/7 emergency line is open for chimney and fireplace trouble in Clearwater.
If there is fire, a gas smell or a carbon monoxide alarm, get everyone out and call 911 from outside first.
Request Your Free Inspection
- Free inspection
- Family owned and operated
- Licensed & insured
Request logged, thanks
Our office will be in touch shortly to book the free inspection.
Proudly American
A locally owned Clearwater family business, with an experienced crew that works inside the city.

Book a Free Chimney Inspection in Clearwater
Send the short form and the office sets a time. Our crew inspects, and you see the written price before anything is touched.


